How to eliminate the residual stress of stainless steel drawing parts? Can sandblasting? The traditional aging methods are: thermal aging, vibration aging, natural aging, static overload aging, therma
The thickness of the plate will be the number of deviation problems, usually within the allowable range of deviation, metal stamping parts processing should be selected under the deviation of the plat
The main factors affecting the stability of the mold and stamping are: the use of mold materials; mold structural parts of the strength requirements; stamping material properties of stability; materia
(1) the manufacture of tensile parts as far as possible the use of standard mold base, and the standard mold base on the type and size to determine the upper and lower mold base type and specification
Drawings on the design drawings Dimensions Note: tensile parts due to the size of the stress varies, so that the thickness of the material after stretching change. In general, the bottom of the centra
Stretch pieces of stainless steel by several times evenly stretched, the tensile accuracy of the pieces will be a great progress, if the failure in the early production process, but also its re-stretc
1, stamping direction to determine the direction of the punching direction of the part is to determine the stretching technology first encountered the question of whether it can not only decide to str
Stretch pieces of stainless steel by several times evenly stretched, the tensile accuracy of the pieces will be a great progress, if the failure in the early production process, but also its re-stretc
(1) a lot of time due to our tensile strength of the various parts of the different sizes, so we have the thickness of the material after the stretch will be more or less some changes. In general, the
Stainless steel tensile spring: spring produced by ordinary spring tensile spring with good flexibility, electrical conductivity, wear resistance, normal temperature (temperature> 200 degrees) spring
The use of a progressive punching die or combination die in the automatic punching of a rotor, a stator plate, or in a connector operation is well known in the art of punching. In recent years, progre